Ben Starr

The Ultimate Food Geek

Product Review: KitchenAid Pasta Extruder

So, for my birthday, my partner got me the KitchenAid attachment that extrudes pasta.  (Their more popular, slightly cheaper pasta attachment is a roller and cutter, which allows you to make authentic fettucini, lasagne, etc.)  With the extruder you can made REAL spaghetti (the roller makes square “spaghetti”), macaroni, fusilli (kinda like rotini but less twisty), rigatoni, and bucatini (which is like thick spaghetti, but hollow in the center like macaroni).  I jumped up and down!  I love making homemade pasta, but I have a hand roller machine, and it’s kind of a pain.  On MasterChef I used the KitchenAid roller attachment, which I’ll admit was slightly better, because you can use both hands to handle the pasta…but rolled pasta is still notoriously difficult to handle, especially the thinner cuts.  It clumps together unless you absolutely douse it in flour, and when you then boil the floury pasta, you get TERRIBLE boil-overs.

I was REALLY excited to try it, but I’ll admit…it’s a plastic machine that costs around $160, and I doubted its ability to ACTUALLY extrude quality pasta.  (A genuine pasta extruding machine costs thousands of dollars.)  A LOT of pressure is required to force pasta dough through tiny dies, which are normally made of bronze, and the KitchenAid’s dies are made of plastic and chrome.  So the first time I used it, I was skeptical and didn’t expect miracles.

I threw together a simple pasta dough…1 cup of AP flour, 1 cup of cake flour, and 1 cup of semolina (what true Italian pasta is made of), 3 eggs, salt, and a splash of water.  I let my KitchenAid do the first part of the kneading…I took over for the last minute to get it really smooth.  Without letting the pasta rest (essential if you’re rolling it out, to let the gluten relax so the dough doesn’t tear), I immediately put a walnut-sized ball of dough into the extruder.  After about a 30 second wait, while the dough was corkscrewed down and pressed through the dies, here’s what came out:

Making Rigatoni with the KitchenAid Pasta Press or Extruder

Uhhhh…wow!  That’s some rigatoni, baby!

I could NOT believe my eyes.  This was a stiff dough…1/3 semolina.  And here comes perfect rigatoni!

There is a built-in slicer that quickly cuts the pasta off, and you just catch it in your hand and toss it onto a towel to dry.

Fresh Rigato Drying on a Towel
I continued feeding walnut-sized pieces into the extruder, making sure the dough fully disappeared into the corkscrew before adding more.  (Per the directions on the package.)  About 30 minutes after I started making the dough, I had 2 pounds of fresh rigatoni drying on the towel on my countertop.

I let it dry for about an hour, then tossed it into a 6 quart Dutch oven about 2/3 full of boiling water.  Like rolled pasta, there was quite a bit of foaming, due to the gluten fibers in the flour escaping into the water and forming a “skin” that causes the water to foam and boil over…but it wasn’t NEARLY as bad as rolled pasta.  (I actually didn’t have any water boil over at all, but the foam rose to within 1/2 inch of the pot’s rim.)

Making Fresh Pasta with the Kitchenaid Pasta Press Attachment

By the way, when you’re boiling pasta, your water should be SALTY.  Not a teaspoon or a tablespoon.  A handful.  Italian chefs say the pasta boil water should taste as salty as the ocean.  If not, your pasta won’t taste its best.

I boiled the fresh rigatoni (after it dried for an hour) for 3 minutes.  ThenI finished cooking it about a minute longer in a vodka sauce I tossed together quickly.  If the rigatoni had gone straight from the extruder into the water, it probably only needed 2 minutes.

MAN was it good!  This machine is really impressive, I NEVER would have imagined it would be so effective.  (And I have NO relationship with KitchenAid whatsoever…this is a genuine, non-biased review.)

Rigatoni being extruded from the Kitchenaid pasta attachment

Cleanup is a little perplexing, as it is with ALL pasta machines.  NO water!  You have to disassemble the extruder (as easy as unscrewing the lid), pop out the die, and pop out the plastic corkscrew that presses the pasta.  Then let it sit overnight for the dough to dry, then you pick out the dried dough with the tip of a knife.  There is a brush included with the set that you can use to brush everything off, then put it back in the box.  NO washing, this will ruin the unit.

Today I tried a dough that was 50% AP flour, and 50% semolina, which is much stiffer and more authentic, but I assumed the extruder would have a harder time with it.  I also chose to extrude fusilli, which is more difficult to extrude than rigatoni, to REALLY give this machine a workout.

Flawless performance.  (No pictures, sorry, my hands were full and Christian was at work.)  It took me 15 minutes, start to finish, to make the dough and extrude it, 2 minutes in the boil water, and 1 minute in the sauce.  Compare that with the length of time you have to boil storebought dried pasta, and it’s ALMOST the same amount of time to get pasta on the plate…only this is fresh and homemade!

Needless to say, I’m going to be making homemade pasta WAY more frequently now.  None of the mess of rolled pasta.  And it’s so great to take the dough straight from kneading into the extruder, without having to let the gluten rest.  You could literally have surprise guests show up on your doorstep, jump into the kitchen, and have a full homemade pasta meal in 30 minutes.  Extraordinary.

I should footnote here that I am using the KitchenAid Professional 600 (575 watts), not the more popular Artisan model, which has 325 watts.  I’m not sure if the smaller amount of power will have an effect on performance.

At around $160-$180 retail, this is NOT an attachment for penny pinchers.  Of course, if you have a Kitchenaid, you are probably not a penny pincher.  I am NOTORIOUSLY stingy with my money, and was given my KitchenAid Pro as a gift for planning a friend’s wedding, and I can WITHOUT A DOUBT say that it’s worth every single penny of the $350ish dollars it costs, and had I known it was going to change my kitchen life, I’d have bought it with my own money many years ago.

Would I have gone out and spent $160 on this attachment?  No.  Because I’m a stingy jerk.  But now that I’ve used it, and see how incomparably easy it is to make extruded pasta, I will get my money’s worth very quickly.  I give this attachment 10 out of 10…I’m THAT impressed!

23 responses to “Product Review: KitchenAid Pasta Extruder”

  1. Mark Avatar
    Mark

    I just started using this attachment last week on my Artisan version KitchenAid. I concur with the above. Although I don’t have the back ground this blogger does, all the more reason to trust the KitchenAid when a moron like me can make perfect spaghetti in a half hour.

    I’ll be trying the rigatoni attachment sometime this week, which is why I stumbled upon this blog in the first place. I was just doing a little research on differences in pasta dough for say, spaghetti versus rigatoni.

    So thanks Ben! You just made me even more confident about doing this on my own! Cheers.

    Mark

  2. Ann Fonz Avatar
    Ann Fonz

    hHw about your luck using the fusilli disc? I cannot get more than about the first three or four “cuts” two continue to twist. I have tried a couple tweaks to the pamphlet recipe with no avail (couple versions with less eggs, one with one more egg, not sifting the flour, etc.). Also tried cooling the dough in the fridge for while, larger and smaller balls in the feeder tube, etc. Any suggestions? Thanks.

    1. Ben Avatar

      I haven’t had any issues at all with the fusilli. The twist is caused by torque from the screw being converted into pressure through the mass of dough. The reason your first few twist is because there’s a lot of dough above it. So you have to feed pasta balls more frequently into the press to keep that pressure up. (If you have a smaller version of the Kitchenaid, like an Artisan, this may strain your motor, so be cautious.)

  3. Michael Dominic Avatar

    The question I have is, is the texture of the extruder as “authentic” as the roller.

    1. Ben Avatar

      Michael, there are two types of pastas…those that are extruded (spaghetti, angel hair, bucatini, rotini, penne, etc.) and those that are rolled (linguine, fetuccini, tagilatele, etc.) “Authentic” isn’t an issue…you can’t make spaghetti by rolling it. You can ONLY make it by extruding it, or it’s not spaghetti, it’s linguine. Extruded pastas tend to have a coarser outer texture, which means they grip the sauce much better. I vastly prefer extruded pastas to rolled pastas, but that’s a personal preference. But “authenticity” is not an issue…you can’t make a rolled pasta variety with an extruder, and you can’t make an extruded pasta with a roller.

  4. Pam Avatar
    Pam

    Have read your recipe twice. I can’t get the rigatoni to NOT stick together! I know I needed more flour so I added it while kneading and still had the same problem. I have now put the dough in the fridge and will try again tomorrow. By the way my recipe is: 4 cups flour, salt, 4 eggs plus 1 egg yolk, and a little water, 1/4 cup olive oil. But have made note of your recipe and will try it.

    1. Ben Avatar

      Pam, are they sticking together as they extrude…or in the boil water? What kind of flour are you using? The olive oil isn’t necessary and I think it may be the culprit…your dough is probably too moist with it. The nice thing about the extruder is that you can have a very stiff, dry dough and the compression it experiences in the extrusion chamber hydrates the dough with less moisture. Less moisture means less sticky.

  5. CJ McPherson Avatar
    CJ McPherson

    So I take it that the rigatoni pasta dough recipe is similar to Pappardelle. I bought the extruder and can’t wait to try it. Since I retired, I have become a pasta making machine. Thanks g or the information you offer. Very much appreciated.

  6. MShih Avatar
    MShih

    Nice review, I have the KA pasta roller and cutter and love it, but wanted to expand on to shapes instead of just long noodles. I got this for xmas and it arrived today, we tried the Rigatoni, with the basic egg pasta recipe in the booklet, however my husband said that the pasta is very thick… I cooked it for more than 6 mins ( fresh right after it came out of the machine ) and some bits were still uncooked in the middle. Did I do something wrong?

    1. Ben Avatar

      Not sure you did anything wrong here…the rigatoni comes out VERY thick, it may need longer than 6 minutes. However, if you’re talking about small dried crunchy chunks in otherwise-cooked pasta, that’s an issue of your pasta dough needing a bit more moisture and more even working.

  7. Arbie Avatar

    A minor note on your cleaning instructions: You are correct that the unit should never go in the water but the extruder disc (which comes apart into three pieces) can be put in the sink, as well as the auger. But I would use a toothpick or a wooden skewer rather than the point of a knife to chip out dried dough, less likely to scratch something.

  8. Eric Avatar
    Eric

    I have been trying to separate the plastic and metal extruder plates for two days. I can’t get them apart. I’ve tried drying as per the directions. I’ve also tried soaking. Nope. Any ideas?

    1. Ben Avatar

      Eric, some of mine pop apart easily, and some I’ve never been able to pop apart. I generally don’t need to separate them to clean, just let it all dry out, and pick out the dried bits with a toothpick.

  9. Jill Avatar

    just used my Kitchenaid pasta maker for the first time. Made the rigatoni…but it didn’t come out round. Just extruded in half rounds, and really thick. Did I do something wrong?

    1. Ben Avatar

      Jill, this IS a thick rigatoni, but I always get fully formed tubes with ridges. Sounds like maybe your dough is too dry?

  10. Jill Avatar

    oh, and I didn’t get good ridges either. hmmm…..

  11. Janina Kendall Avatar
  12. Melissa Avatar
    Melissa

    I made the 50% flour, 50% Semolina and tried to make theFusilli. It wouldn’t twist! Only one set of noodles twisted, but I have no idea why that particular time twisted! Help!

  13. alan Avatar
    alan

    i found this today and my dough using your recipe is more like sand than any sort of dough. I cannot get it to combine into a dough. I used 3 large eggs, 3 c of flour as indicated above and a few splashes of water. I used the KA with the low speed and what am I doing wrong? It is literally as if I scooped up a bucket full of New Jersey’s finest sand

    1. Ben Avatar

      Alan, this recipe makes a much stiffer dough than for pasta that’s to be rolled out. I would not describe the texture as “sand,” though, it seems you’re working with old flour, or flour with a VERY low water content. Just add a little more water, or an extra egg. But even a dough that won’t hold together in the mixer bowl or by manual kneading typically WILL come together in the pressure of the extruder.

  14. Meredith Berry Avatar
    Meredith Berry

    So here’s my frustration. I make the pasta dough, it looks and feels great (firm, not sticky), send it thro the extruder (have made small macaroni and spaghetti) and it comes out of the extruder well – but then after I slice it off, it glumps together on the tray. I try to separate it and esp the spaghetti just all pushes together. So I’ve tried reworking the extruded glumped pasta with more flour and sending it thro again.Se result . So frustrating. Any suggestions?

    1. Ben Avatar

      Meredith, clumping can happen with any pasta, but it’s usually a sign that the dough is too wet. The nice thing about the extruder is that you can make very dry doughs, and they can still be extruded. Reduce the yolks in the recipe by 1, and try it again. You may not be able to work it at all with your hands, it may be that stiff, but the extruder will knead it just fine. As soon as the pasta comes out of the extruder, toss some flour onto it. It gets REALLY messy, but the flour will help keep the individual strands of pasta from sticking together.

    2. Brian Avatar
      Brian

      Catch the pasta with your hand and then lay it on a tray lined with a tea towel, being sure to separate the pieces.

Leave a Reply