FINALLY! An All-Stainless Steel Meat Grinder Attachment for Kitchenaid! (Smokehouse Chef)

**This is an objective product review of a meat grinder I recently purchased.  I have no affiliation with either Kitchenaid or Smokehouse Chef, I do not receive any benefits or “kickbacks” from them, and the links in this ad are to the product pages on Amazon if you want to purchase them.  I do not benefit in any way from any of this, this review is simply for your information.

Smokehouse Chef’s all-stainless steel, dishwasher-safe meat grinder attachment for Kitchenaid mixers

I’ve gone through several meat grinders.  Not because I break them or burn them out…but because they’re just not dishwasher safe, even if the manufacturer claims they are.  And when you’re talking about grinding raw meat, sterility is absolutely paramount, so the idea that I can only wash the complicated parts of a meat grinder by hand using only mild soap, and NO rinses in a sterilizing solution like bleach or vinegar…none of that computes in my brain hole.  Why do manufacturers even produce meat grinders that aren’t 100% dishwasher safe?

The answer is “cost.”  Aluminum is cheap and light, easy to manufacture, and therefore, cheap for the consumer.  But it’s not dishwasher safe.  And it reacts with acids and bleach, and the potent enzymes in modern dishwashing detergents.  Meaning…it’s a TERRIBLE choice for a meat grinder.  But it’s still the metal of choice for 99% of consumer-model meat grinders available today.

Kitchenaid markets its own branded meat grinder attachment for around $50-$65, and states “most parts dishwasher safe,” and the manual for the attachment says to only handwash the blade and the grinding die in mild soapy water.  While these are the smallest parts, making them easy to hand wash (though not, perhaps, safe…washing small, slippery, sharp objects can be dangerous), these parts directly contact the meat and I’d feel far more comfortable if they could be sterilized.  The auger and grinder body are primarily made of plastic, and can be washed in the dishwasher.

To complicate matters…most serious home cooks find this attachment to be fairly worthless.  Of the 800+ reviews on Amazon, more than 100 of them are critical, 1-star reviews, referencing everything from metal shavings ending up in the meat (!!!), to a blade so dull it simply jams every few minutes and needs to be disassembled and cleared repeatedly during grinding, to the attachment straining the Kitchenaid mixer so much it blew out the motor.  Very few people who own this attachment find that it produces a quality grind…the meat ends up more mushy than meaty.  I made the mistake of ordering the attachment several years ago and returned it after the first use.  I email and tweet Kitchenaid on a regular basis, begging them for more quality in their attachments, which are largely very cheap and ineffective.  I’m HAPPY to pay a bit more for an all-stainless attachment that is of quality construction and is dishwasher safe, and I think many Kitchenaid owners are like-minded…but they just don’t make them.  (I will state that the Kitchenaid pasta roller and pasta extruder attachments are exceptionally useful, and I’m very happy with them…however, they cost almost as much as the stand mixer itself, and cannot be washed at all, only brushed off!)

Cabela’s all-stainless meat grinder…a $400 toy, but dishwasher safe.

And I’ve been looking for a quality stainless-steel meat grinder ever since.  I went through a few self-standing models that claimed to be dishwasher safe, or didn’t reference the dishwasher in their materials, but ended up NOT being dishwasher safe.  (When they came out of the dishwasher, they were coated in oxidized grey dust.)  And I was uneasy about the fact that I needed a massive, self-standing grinder taking up space in my garage, when an appropriate power source, the 1-horsepower motor on my pro-model Kitchenaid stand mixer, already takes up space on my counter.  To be fair, Cabela’s produces an all-stainless steel self-standing grinder that is very popular among the hunting community, but their cheapest 1/2 horsepower model is over $400, and their cheaper models are not all-stainless and aren’t dishwasher safe.  But I have twice that much horsepower in my Kitchenaid already…and I wanted an all-stainless steel meat grinder attachment for it…why is that an unreasonable request?

Enter Smokehouse Chef, a small, family-owned Texas company that has been producing all-stainless replacement parts for OTHER manufacturer’s meat grinders, including Cabela’s and Kitchenaid.  For years they’ve marketed an “all-metal” grinder attachment, but they must have heard my endless pleas to Kitchenaid, because they have just released a full stainless steel grinder attachment at the very reasonable price of $169 on their websiteThis is the only Kitchenaid meat grinder attachment currently on the market that is made entirely from stainless steel, and thus dishwasher safe.  It is also cheaper than the grinder attachment manufactured by Chef’s Choice, which has aluminum parts and costs $150-$200!

I was as excited as a kid on Christmas morning when it arrived on my doorstep, and within moments I had it opened, attached to my Kitchenaid, and I started making sausage with some venison I had in the freezer, and some pork fatback (the layer of pure fat from a pig’s back, normally used for making sausage).

The first thing I noticed is that the hopper (the tray that holds the un-ground meat) is massive…way bigger than the Kitchenaid attachment.  I had 4 pounds of meat and fat in there, and there was room for more.

The plastic tamper that allows you to push the meat down into the grind cylinder is solid and easy to use.  And the grinder performs flawlessly…the blade is sharp, and using the medium grind die (the grinder comes with 3 dies, fine, medium and coarse, as well as a stainless sausage stuffing sleeve) I got an absolutely gorgeous grind on the venison.  After grinding 4 pounds of meat/fat, and then casing the resulting sausage, there was still no discernible heat on the grinder.  Meat grinders build heat at the surface where the blade contacts the die, and heating meat into the danger-zone where pathogens can rapidly multiply (40F-140F) can become a serious problem.  On MasterChef, they had us combat this by adding ice to the meat as it was grinding, which seemed ludicrous to me…all that did was water down the meat.  The way *I* combat heat buildup is to put the cubed meat and fat into the freezer for an hour before grinding, which also gives you a much better final grind texture, as the meat cuts more easily when it’s a little frozen.

After about an hour of grinding and casing, I disassembled the grinder and tossed all the parts into the dishwasher, running it on the longest cycle with sterilization.  (This gave me time to cook and devour my sausages!!!)

Everything came out spotless, with the minor exception of the blade, which had a tiny bit of rust inside the stamped logo.  A bit of a disappointment, but understandable, as the stamping process creates heat and the friction between the stamp and the blade can create chemical reactions that change the properties of stainless steel.  I brushed it well and spritzed on a bit of oil.  If the rust continues to be a problem, I will update this blog as well as contact Smokehouse Chef.

My only real beef with this grinder right now is that it comes without a manual or instructions, so if you don’t already know your way around a meat grinder, you’ll need to do a bit of internet searching and YouTubing to figure out how to assemble and use it.  But that was no issue for me.  All in all, I’m incredibly pleased with this grinder and I see lots and lots and LOTS of sausage in my future (no jokes please)!

Most Kitchenaid attachments require too much power for the basic Artisan model

***IMPORTANT***  Due to the stress that this attachment can place on the underpowered motor in the Kitchenaid entry-model, tilt-head mixer (the Artisan), I DO NOT recommend you use this attachment on Artisan mixers.  For that matter, I don’t recommend this model to anyone for ANY reason.  There’s just not enough power to do anything but beat egg whites and bake cookies.  If you want to knead bread, or use the pasta or meat grinding attachments, you need a more powerful model.  I highly recommend the version Costco sells, a 1hp 6-quart model, which is often available throughout the year at under $300 on sale and after a manufacturer’s rebate.  This is the model we use at FRANK, where we often make pastas and knead breads for 18 people a night, 4 nights in a row.  It is strong, whisper-quiet, and a great value.

Feel free to comment below if you’ve had experience with any meat grinders that you can recommend or caution us against!

198 Responses to FINALLY! An All-Stainless Steel Meat Grinder Attachment for Kitchenaid! (Smokehouse Chef)

  1. On the Smoke House Chef website there is also a grinder made by HK. Says it is a culinary school version. Any experience with this model? It appears to be all SS, dishwasher safe, etc. But looks like the tray might be smaller. Just curious if there are other differences or any pros / cons.

    • Russ,

      The HK version does have a smaller loading pan and it is also fastened to the grinder housing. It is stainless steel but retains the original cast finish. The performance is the same as the original version – but with less moving parts and the maintenance free finish it is a nice fit for a classroom environment with multiple users and frequent washing.

  2. Edward Collins

    Does anyone know if this will grind chicken bones? I make raw food for my dogs, use mostly chicken quarters, and already have a 600w Kitchenaid mixer.

    • Edward, I’ve never ground bones in mine. I’d imagine the spine and ribs would be fine, but the leg and thigh, maybe not?

  3. Will this grind through chicken/turkey bones? Interested in using it for grinding for dog food.

  4. I would really like to purchase a new meat grinder. My partner and i read your article and I benefited. I obtained an idea to buy a finest meat grinder. Thank you.

  5. My wife and I are excited about getting one of these stainless grinders as we were completely disgusted with the plastic grinder attachment offered by KitchAid. We just didn’t bother to buy anything until we found one that fit our desired specifications as we knew we would be disappointed and frustrated with something inferior.

    With regard to the blade, we’re going to treat it like a cast iron pan by curing it with oil and heat in the oven to hopefully help alleviate the possibility of it rusting. We don’t use a dishwasher, so we’ll simply wash it in ‘hot’, soapy water with a brush, rinse, 10-min bleach, rinse well, air dry, oil and heat in an already hot oven the next time we roast or bake something (we’re frugal so we like to multi-purpose as much as possible). As we’ll only be using it maybe once every month, at the most, it should be safe from bacterial contamination and also last us a long time.

    Thank you for your very helpful review.

    • Applying heat to any blade will weaken the temper in the metal. It will cause the blade to dull quicker. The temps needed for carbonizing oil or fat on to iron is hot enough to cause this. I would treat the blade like any carbon steel knife. Dry well, let air dry after to be sure, then a thin lay er of mineral oil to be safe. You can also force a patina on carbon steel using highly acidic stuff for example, smearing mustard or mayo over blade and letting it sit for a while. The patina should add some protection from rust. If the blade is stainless steel itself, but rusting I would contact the manufacturer, you may have just got one with a defect.

Leave a Reply

Your email address will not be published. Required fields are marked *